Avamprogetto 2b
Consultazione 2017/22: Progetto di legislazione esecutiva relativa alla revisione totale della legge federale sulla sorveglianza della corrispondenza postale e del traffico delle telecomunicazioni · 34 pagine
Fedlex · Progetto · Pagina 31Fedlex · Progetto
12 Protocol stack for the IP delivery network
The protocol stack for the IP delivery network connection is shown in the table below:
NETWORK IP v4 according to IETF RFC 791
MAC Frame Format according to
MAC-Frame
IEEE 802.3
Electrical or optical interface
according to IEEE 802.3
1000BASE-T, 1000BASE-SX or
PHYSICAL
1000BASE-LX
Connector: Electrical RJ-45 or
optical LC
For connecting to IP delivery networks, the systems being attached shall support at least one protocol stack for the lower layers capable of providing the bandwidth required to deliver the results of interception for a specific service with the specified number of concurrent interceptions.
Protocol stacks with Tagged MAC Frame Format are preferred.
MAC-Frame Basic MAC Frame Format according to IEEE 802.3 clause
3.1.1, 3.2, 3.3 and 3.4
PHYSICAL 1000Base-T according to IEEE 802.3 clause 40
Connector: RJ45
MAC-Frame Basic MAC Frame Format according to IEEE 802.3 clause
3.1.1, 3.2, 3.3 and 3.4
PHYSICAL 1000Base-SX or 1000Base-LX, according to IEEE 802.3
clause 38 single-mode or multimode
Connector: LC with single-mode or multimode fibre
MAC-Frame Tagged MAC Frame Format according to IEEE 802.3 clause
3.2 (in particular 3.2.7 item b)), 3.3 and 3.4, and IEEE
802.1Q clause 9 and Annex C
PHYSICAL 1000Base-T according to IEEE 802.3 clause 40
Connector: RJ45
MAC-Frame Tagged MAC Frame Format according to IEEE 802.3 clause
3.2 (in particular 3.2.7 item b)), 3.3 and 3.4, and IEEE
802.1Q clause 9 and Annex C
PHYSICAL 1000Base-SX or 1000Base-LX, according to IEEE 802.3
clause 38 single-mode or multimode
Connector: LC with single-mode or multimode fibre
For connecting to the delivery network, the systems being attached shall support IP according to IETF RFC 791.